EXTRUSION
AUTOMATED
EXTRUSION LINES
PR 14 MN (6” billet)
PR 20 MN (7” billet)
PR 28 MN (8” billet)
ANNUAL PRODUCTION
CAPACITY
1500 active profile codes
4000 dies, simple or porthole type
ALLOYS
EN-AW-6082 (AlSi1MgMn)*
EN-AW-6005 (AlSiMg)*
EUROPA can extrude most 6XXX series aluminum alloys in various temper grades. The most commonly used alloys are as follows:
EN-AW 6060: Architectural sections, frames, lighting fixtures, railings, ladders, furniture, fences, and flooring.
EN-AW 6063: Architectural sections, frames, lighting fixtures, railings, ladders, furniture, fences, and heat sinks.
PRODUCTION CAPACITY
| STANDARDS ΕΝ | DESCRIPTION |
| ALUMINUM AND ALUMINUM ALLOYS EXTRUDED INTO BARS / RODS, TUBES, AND PROFILES | |
| ΕΝ 573-3 | Chemical composition and form of wrought products |
| ΕΝ 755-1 | Technical conditions for inspection and delivery |
| ΕΝ 755-3 | Round bars, permissible tolerances for dimensions and form |
| ΕΝ 755-4 | Square bars, permissible tolerances for dimensions and form |
| ΕΝ 755-5 | Rectangular bars, permissible tolerances for dimensions and form |
| ΕΝ 755-6 | Hexagonal bars, permissible tolerances for dimensions and form |
| ΕΝ 755-7 | Seamless tubes, permissible tolerances for dimensions and form |
| ΕΝ 755-9 | Profiles, permissible tolerances for dimensions and form |
| ALUMINUM AND ALUMINUM ALLOYS EXTRUDED – PRECISION PROFILES IN ALLOYS EN-AW 6060 AND EN-AW 6063 6063 | |
| EN-12020-1 | Technical conditions for inspection and delivery (for precision profiles) |
| EN-12020-2 | Permissible tolerances for dimensions and form (for precision profiles) |
DIMENSIONS OF PRODUCED PROFILES
● Width can reach up to 260 mm, with specially designed dies.
● Maximum length can reach 7.5 m.
● Length and alloy are based on customer requirements.
| Minimum weight | 0,06 kgr/m |
| Maximum weight | 15 kgr/m |
| Minimum length | 3 m |
| Maximum length | 7,5 m |
| Wall thickness starting | από 0,8 mm |
